cover it

SS MNH.00 00 10.12.12 Flat Filaments Sleeve MNH Innovative Flat Filament Braided For High Abrasion Resistance Abrasion Test Data Physical Properties MNH - Chemical Resistance Index Aromatic Solvents Aliphatic Solvents Chlorinated Solvents Weak Bases Salts Strong Bases Salt Water 0-S-1926 Hydraulic Fluid MIL-H-5606 5 Severely Affected 4 More Affected 3 Affected Little Effect No Effect 2 1 Lube Oil MIL-L-7808 De-Icing Fluid MIL-A-8243 Strong Acids Strong Oxidants Esters/Ketones UV Light Petroleum Fungus ASTM G-21 5 Severely Affected 4 More Affected 3 Affected Little Effect No Effect 2 1 • Abrasion resistance: E • Abrasion test machine: Taber 5150 • Abrasion test wheel: Calibrase H-18 • Abrasion test load: 500g • Room temperature: • Humidity: 72% • Minor scuffing: 100 test cycles • One broken strand: 900 test cycles • Second Broken Strand: 1,200 test cycles • One strand pulled out of material: 3,500 test cycles • Material wear out: 4,400 test cycles • Pre-test weight: • Post-test weight: • Test end loss of mass point of destruction: xtremely high 80°F 7,191.6 mg 6,761.4 mg 430.20mg • Flat filament: .020 • Flammability rating: N/A • Recommended cutting: Hot Knife • Colours: 1 • Wall thickness: .05 • Tensile strength(Yam): .05 • Specific gravity ASTM D-792 : 1.12 • Moisture absorption % ASTM D-570 : 2.5 • Hard vacuum data ASTM E-595 at 10-5 torr : TML 1.10 CVCM .01 WVR .69 • Smoke D-Max ASTM E-662 : 56 • Outgassing: High • Oxygen index ASTM D-2863 : 22

RkJQdWJsaXNoZXIy NTEwMDc=