cover it

SS MFR.00 00 10.12.12 MFR Flexible, Semi-Rigid Split Sleeving Will Not Support Combustion Braided Wrap Sleeve MFR - Chemical Resistance Index Aromatic Solvents Aliphatic Solvents Chlorinated Solvents Weak Bases Salts Strong Bases Salt Water 0-S-1926 Hydraulic Fluid MIL-H-5606 5 Severely Affected 4 More Affected 3 Affected Little Effect No Effect 2 1 Lube Oil MIL-L-7808 De-Icing Fluid MIL-A-8243 Strong Acids Strong Oxidants Esters/Ketones UV Light Petroleum Fungus ASTM G-21 5 Severely Affected 4 More Affected 3 Affected Little Effect No Effect 2 1 • Abrasion resistance: H • Abrasion test machine: Taber 5150 • Abrasion test wheel: Calibrase H-18 • Abrasion test load: 500g • Room temperature: 70 • Humidity: 63% • : 500 test cycles • : 1,200 test cycles • 00 test cycles • Pre-test weight: • Post-test weight: • Test end loss of mass point of destruction: igh °F Slight scuffing visible Visible wear & five broken filaments Material wear out: 1,6 3,469.8 mg 3,114.0 mg 355.8 mg • Monofilament diameter ASTM D-204 : .008-.015 • Flammability rating FMVSS-302 Approved : VW-1 • Recommended cutting: Scissors / HK • Colours: 1 • Wall thickness: .024-.038 • Tensile strength ASTM D-2256 Lbs (Yarn): 4-6.5 • Specific gravity ASTM D-792 : 1.38 • Moisture absorption % ASTM D-570 : .1-.2 • Hard vacuum data ASTM E-595 at 10-5 torr : TML .19 CVCM .04 WVR .06 • Smoke D-Max ASTM E-662 : 275 • Outgassing: Med • Oxygen index ASTM D-2863 : 31 Abrasion Test Data Physical Properties

RkJQdWJsaXNoZXIy NTEwMDc=